Essentials Mode: Additional Animations

• Additional Animations
• Additional Collection
  • Additional One Shot Category
  • Additional Loops Category
  • Additional Pan & Zoom Category
  • Additional Looks Category
  • Additional Stylize Category

Additional Animations

An entrance animation plays as a layer appears, and an exit animation plays as it leaves. A layer can also have extra animations on top of those, such as a single hop or shake, a movement that repeats, a slow pan and zoom across an image, or a visual effect like film grain.

In Essentials Mode, one of the two ways to animate layers in the Module Editor, animations are picked from ready-made presets instead of built keyframe by keyframe.

This article lists every one of these added presets, with what each one does and the settings it offers. They are under a tab called Additional.

To find them, go to the Module Editor, select a layer, and in the Right Sidebar click the Animation icon ¹ in the Mode Switcher to enter Animation Mode.

The Additional ² tab is at the top of the sidebar, beside In and Out.

The collection tabs show while Essentials is chosen with the switch at the bottom of the sidebar.

The entrance and exit presets themselves are described in In and Out Animations.

One Shot and Loops are available to every layer added to a slide. Pan & Zoom is available to Image layers only. Looks and Stylize are available to Image, Video and Shape layers. The Slide Background has its own collections, described in Slide Background Reveal Transitions, Slide Background Motion Transitions, Slide Background Distortion Transitions, Slide Background Pan & Zoom and Slide Background Filters.

Applying a preset follows the same steps in every collection, described in Animation Essentials Mode. Clicking a preset tile opens its configuration panel, where its parameters are set before Apply adds the animation to the layer.

Additional Collection

The Additional collection holds the presets that add movement or effects to a layer on top of its in and out animations. Which categories it shows depends on the type of the selected layer.

The Additional collection has five categories: One Shot, Loops, Pan & Zoom, Looks and Stylize.

Additional One Shot Category

The One Shot category holds seventeen presets that play one movement once and return the layer to its position. Applying one adds its keyframes after the last keyframe of the layer's animation in the scene the Timeline shows.

The One Shot presets have no Easing or Duration settings.

Additional One Shot Hop

The layer squashes slightly, jumps straight up, falls back to its position and squashes again on landing. It stretches to 110% of its height at the top of the jump, and the landing returns to normal on an elastic curve.

Parameters:

• _Strength: Subtle, Medium, Strong. The height of the jump: 60, 110 or 180 pixels.

Additional One Shot Flip

The layer squashes slightly, jumps 145 pixels up while it rotates one full turn, falls back to its position and squashes again on landing.

Parameters:

• _Style: Forward, Backward, Barrel, Spin. The rotation. Forward and Backward rotate the layer around its horizontal axis in opposite directions, Barrel around its vertical axis, and Spin flat on the slide.

Additional One Shot Pop

The layer scales up and rotates slightly in 160 milliseconds, then returns to its normal size and angle on an elastic curve.

Parameters:

• _Strength: Subtle, Medium, Strong. How far the layer scales and rotates: to 107% and 1.5 degrees, 116% and 2.5 degrees, or 130% and 4 degrees.

Additional One Shot Shake

The layer moves or rotates back and forth five times, each swing smaller than the one before, and stops at its position. The whole shake takes 555 milliseconds.

Parameters:

• _Style: Horizontal, Vertical, Rotate. The movement. Horizontal starts with a 20 pixel move sideways, Vertical a 17 pixel move up and down, and Rotate a 7 degree rotation.

Additional One Shot Dash

The layer moves 20 pixels backward, then 150 pixels in the chosen Direction, and returns to its position. On Left and Right it skews 12 degrees during the move, and on Up and Down it stretches along the move.

Parameters:

• _Direction: Up, Left, Right, Down. The direction of the movement.

Additional One Shot Nod

The layer rotates back and forth in 3D around its horizontal axis, up to 26 degrees, while it dips up to 6 pixels, and returns to its position. The nod takes 990 milliseconds.

Additional One Shot Tada

The layer shrinks to 93%, then scales up to 112% while it rotates alternately left and right by up to 5 degrees, and returns to its normal size and angle. The movement takes 850 milliseconds.

Additional One Shot Jello

The layer skews back and forth on both axes, starting at 15 degrees and getting smaller with each swing, and returns to its normal shape. The movement takes 750 milliseconds.

Additional One Shot Heartbeat

The layer scales up twice in quick succession, first to 114% of its width and 118% of its height, then to 122% and 127%, returning to normal size after each. The movement takes 690 milliseconds.

Additional One Shot Rubber

The layer stretches wide and short, then narrow and tall, then wide again by a smaller amount, and returns to its normal shape on an elastic curve. The first stretch is 128% of its width and 76% of its height.

Additional One Shot Levitate

The layer rises 30 pixels and scales to 104%, rises to 38 pixels while it rotates 1.6 degrees, and returns to its position. The movement takes 1520 milliseconds.

Additional One Shot Stomp

The layer rises 46 pixels while it stretches taller, drops to 15 pixels below its position while it squashes to 80% of its height, and returns to its position on an elastic curve.

Additional One Shot Swoosh

The layer moves 24 pixels backward, then moves 200 pixels in the chosen Direction and 70 pixels to one side along a curved path, and returns to its position along a curved path.

Parameters:

• _Direction: Up, Left, Right, Down. The direction of the movement.

Additional One Shot Orbit

The layer moves once around a circular path 150 pixels across and returns to its position. The circle lies on the side set by Direction. The movement takes 1040 milliseconds.

Parameters:

• _Direction: Up, Left, Right, Down. The side of the layer the circle lies on.

Additional One Shot Figure Eight

The layer moves along a figure-eight path 240 pixels wide and 120 pixels high, one loop to each side of its position, and returns to its position. The movement takes 1760 milliseconds.

Additional One Shot Boomerang

The layer moves 280 pixels to the side and 70 pixels up along a curved path while it rotates half a turn, then returns to its position along a curved path while it completes the turn.

Parameters:

• _Direction: Left, Right. The side the layer moves to.

Additional One Shot Lasso

The layer squashes slightly, moves once around a circular path 200 pixels across, returns to its position and squashes again before it stops. The circle lies on the side set by Direction.

Parameters:

• _Direction: Up, Left, Right, Down. The side of the layer the circle lies on.

Additional Loops Category

The Loops category holds nine presets that repeat a movement or a filter change, and one preset, No Loop, that removes a loop.

The Loops presets have no Easing or Duration settings.

Additional Loops No Loop

Removes a loop added to the layer earlier. The layer's in and out animations stay as they are.

Additional Loops Pendulum

The layer rotates back and forth around a pivot point outside it, repeating indefinitely. Each swing takes 1500 milliseconds.

Up and Down place the pivot two layer heights below or above the layer and rotate between -40 and 40 degrees. Left and Right place it beside the layer and rotate between -20 and 20 degrees. In Place rotates the layer around its own center.

Parameters:

• _Direction: Up, Left, In Place, Right, Down. Where the pivot point sits.

Additional Loops Orbit

The layer moves around a circular path, one lap every 3000 milliseconds, repeating indefinitely.

Parameters:

• _Style: Right, Left, Rightbig, Leftbig. Right and Left use a circle about 100 pixels across and travel around it in opposite directions. Rightbig and Leftbig do the same on a circle three times the size.

Additional Loops Wave

The layer moves back and forth along a wavy horizontal path about 330 pixels long, taking 3000 milliseconds each way, repeating indefinitely.

Parameters:

• _Direction: Up Left, Up Right, Left, Right. Left and Right set the side the path starts on. Up Left and Up Right do the same and also rotate the layer to follow the direction of the path.

Additional Loops Wiggle Horizontal

The layer rotates in 3D around its vertical axis, back and forth between -40 and 40 degrees, taking 1500 milliseconds each way and repeating indefinitely.

Parameters:

• _Strength: Subtle, Medium, Strong. Subtle rotates the layer around its own center. Medium moves the pivot point 60 pixels toward the viewer, and Strong 160 pixels away from the viewer.

Additional Loops Wiggle Vertical

The layer rotates in 3D around its horizontal axis, back and forth between -40 and 40 degrees, taking 1500 milliseconds each way and repeating indefinitely.

Diagonal and Diagonalmirror move the layer back and forth along a diagonal instead, while it scales between 100% and 140% and rotates in 3D. The two diagonals are mirror images.

Parameters:

• _Style: Light, Medium, Strong, Diagonal, Diagonalmirror. Light rotates the layer around its own center. Medium moves the pivot point 60 pixels toward the viewer, and Strong 160 pixels away from the viewer.

Additional Loops Spin

The layer rotates around its center, repeating indefinitely.

Parameters:

• _Style: Normal, Yoyo, Floaty. Normal rotates one full turn every 1500 milliseconds. Yoyo rotates half a turn and back. Floaty rotates two full turns back and forth while the layer moves along a curved path and blurs by up to 5 pixels.

Additional Loops Hoover

The layer moves back and forth in a straight line, repeating indefinitely.

Parameters:

• _Direction: Vertical, Horizontal. Vertical moves the layer between 10 pixels below and 10 pixels above its position, 3000 milliseconds each way. Horizontal moves it between 100 pixels to each side, 1500 milliseconds each way.

Additional Loops Pulse

The layer scales up from its center and back to its normal size, repeating indefinitely.

Parameters:

• _Style: Fast, Heavy, Soft, Sharp, pop, Shrink. How far and how fast the layer scales each way: Fast to 110% in 1000 milliseconds, Heavy to 135% in 1500, Soft to 110% in 2000, Sharp to 125% in 500, pop to 130% in 800, and Shrink down to 80% in 1000.

Additional Loops Filters

Changes a visual filter on the layer back and forth, repeating indefinitely. The layer does not move.

Parameters:

• _Style: Mono., Fade, Flatter, Lightning. Mono. changes the layer between full color and grayscale, 500 milliseconds each way. Fade changes its opacity between full and none, 750 milliseconds each way. Flatter changes it between full opacity and 20% with a 4 pixel blur, 100 milliseconds each way. Lightning changes its brightness between 100% and 1000%, 500 milliseconds each way.

Additional Pan & Zoom Category

The Pan & Zoom category holds fifteen presets that scale and move an Image layer's image inside the layer's frame over the length of the slide, and one preset, None, that removes the move.

Additional Pan & Zoom None

Removes a Pan & Zoom move added to the layer earlier. Clicking the tile applies it directly, with no configuration panel.

Additional Pan & Zoom Zoom In

Scales the image from 100% to 113% centered in the layer's frame.

Parameters:

• _Strength: Subtle, Medium, Strong. Multiplies how far the image scales above 100% by 0.55, 1 or 1.7. The scales in the description are for Medium.
• _Duration: Whole Slide, Half. Whole Slide runs the move over the slide's full duration. Half finishes the move halfway through and holds the last frame.
• _Easing: Smooth, Snappy, Back, Bounce, Elastic. The acceleration curve of each step of the move. With no curve selected, the move runs at a constant rate.

Additional Pan & Zoom Zoom Out

Scales the image from 113% down to 100% centered in the layer's frame.

Parameters:

• _Strength: Subtle, Medium, Strong. Multiplies how far the image scales above 100% by 0.55, 1 or 1.7. The scales in the description are for Medium.
• _Duration: Whole Slide, Half. Whole Slide runs the move over the slide's full duration. Half finishes the move halfway through and holds the last frame.
• _Easing: Smooth, Snappy, Back, Bounce, Elastic. The acceleration curve of each step of the move. With no curve selected, the move runs at a constant rate.

Additional Pan & Zoom Pan

Holds the image at 116% and moves the visible area across it from one side of the image to the other in the chosen Direction.

Parameters:

• _Direction: Left, Right, Up, Down. The direction the visible area moves across the image.
• _Strength: Subtle, Medium, Strong. Multiplies how far the image scales above 100% by 0.55, 1 or 1.7. The scales in the description are for Medium.
• _Duration: Whole Slide, Half. Whole Slide runs the move over the slide's full duration. Half finishes the move halfway through and holds the last frame.
• _Easing: Smooth, Snappy, Back, Bounce, Elastic. The acceleration curve of each step of the move. With no curve selected, the move runs at a constant rate.

Additional Pan & Zoom Zoom & Pan

Scales the image from 107% to 121% while the visible area moves across it in the chosen Direction, from 12% to 88% of the way across.

Parameters:

• _Direction: Left, Right, Up, Down. The direction the visible area moves across the image.
• _Strength: Subtle, Medium, Strong. Multiplies how far the image scales above 100% by 0.55, 1 or 1.7. The scales in the description are for Medium.
• _Duration: Whole Slide, Half. Whole Slide runs the move over the slide's full duration. Half finishes the move halfway through and holds the last frame.
• _Easing: Smooth, Snappy, Back, Bounce, Elastic. The acceleration curve of each step of the move. With no curve selected, the move runs at a constant rate.

Additional Pan & Zoom Corner Push

Scales the image from 100% to 119% while the visible area moves from the center of the image into the chosen Corner.

Parameters:

• _Corner: Top Left, Top Right, Bottom Left, Bottom Right. The corner the view moves toward.
• _Strength: Subtle, Medium, Strong. Multiplies how far the image scales above 100% by 0.55, 1 or 1.7. The scales in the description are for Medium.
• _Duration: Whole Slide, Half. Whole Slide runs the move over the slide's full duration. Half finishes the move halfway through and holds the last frame.
• _Easing: Smooth, Snappy, Back, Bounce, Elastic. The acceleration curve of each step of the move. With no curve selected, the move runs at a constant rate.

Additional Pan & Zoom Breathe

Scales the image from 100% to 111% over the first half of the move and back to 100% over the second half, centered in the layer's frame.

Parameters:

• _Strength: Subtle, Medium, Strong. Multiplies how far the image scales above 100% by 0.55, 1 or 1.7. The scales in the description are for Medium.
• _Duration: Whole Slide, Half. Whole Slide runs the move over the slide's full duration. Half finishes the move halfway through and holds the last frame.
• _Easing: Smooth, Snappy, Back, Bounce, Elastic. The acceleration curve of each step of the move. With no curve selected, the move runs at a constant rate.

Additional Pan & Zoom Sweep

Scales the image up to 117% while the visible area moves to one side, moves it across to the other side, then scales back to 100% as it returns to the center. The movement runs along the axis set by Direction.

Parameters:

• _Direction: Left, Right, Up, Down. The axis the visible area moves along.
• _Strength: Subtle, Medium, Strong. Multiplies how far the image scales above 100% by 0.55, 1 or 1.7. The scales in the description are for Medium.
• _Duration: Whole Slide, Half. Whole Slide runs the move over the slide's full duration. Half finishes the move halfway through and holds the last frame.
• _Easing: Smooth, Snappy, Back, Bounce, Elastic. The acceleration curve of each step of the move. With no curve selected, the move runs at a constant rate.

Additional Pan & Zoom Tilt Drift

Scales the image from 109% to 117% while it rotates from level to 1.6 degrees. The image is scaled enough to keep its rotated corners outside the frame.

Parameters:

• _Strength: Subtle, Medium, Strong. Multiplies how far the image scales above 100% by 0.55, 1 or 1.7. The scales in the description are for Medium.
• _Duration: Whole Slide, Half. Whole Slide runs the move over the slide's full duration. Half finishes the move halfway through and holds the last frame.
• _Easing: Smooth, Snappy, Back, Bounce, Elastic. The acceleration curve of each step of the move. With no curve selected, the move runs at a constant rate.

Additional Pan & Zoom Arc Swing

Moves the visible area across the image in the chosen Direction, from 12% to 88% of the way across. The image scales from 104% up to 120% at the middle of the move and back down to about 109% at the end.

Parameters:

• _Direction: Left, Right, Up, Down. The direction the visible area moves across the image.
• _Strength: Subtle, Medium, Strong. Multiplies how far the image scales above 100% by 0.55, 1 or 1.7. The scales in the description are for Medium.
• _Duration: Whole Slide, Half. Whole Slide runs the move over the slide's full duration. Half finishes the move halfway through and holds the last frame.
• _Easing: Smooth, Snappy, Back, Bounce, Elastic. The acceleration curve of each step of the move. With no curve selected, the move runs at a constant rate.

Additional Pan & Zoom Push & Settle

Scales the image from 100% to 124% over the first half of the move, then back down to about 119% over the second half, centered in the layer's frame.

Parameters:

• _Strength: Subtle, Medium, Strong. Multiplies how far the image scales above 100% by 0.55, 1 or 1.7. The scales in the description are for Medium.
• _Duration: Whole Slide, Half. Whole Slide runs the move over the slide's full duration. Half finishes the move halfway through and holds the last frame.
• _Easing: Smooth, Snappy, Back, Bounce, Elastic. The acceleration curve of each step of the move. With no curve selected, the move runs at a constant rate.

Additional Pan & Zoom Pull Back

Scales the image from 124% down to 104% while the visible area moves from 80% to 15% of the way across it, along the axis set by Direction.

Parameters:

• _Direction: Left, Right, Up, Down. The axis the visible area moves along.
• _Strength: Subtle, Medium, Strong. Multiplies how far the image scales above 100% by 0.55, 1 or 1.7. The scales in the description are for Medium.
• _Duration: Whole Slide, Half. Whole Slide runs the move over the slide's full duration. Half finishes the move halfway through and holds the last frame.
• _Easing: Smooth, Snappy, Back, Bounce, Elastic. The acceleration curve of each step of the move. With no curve selected, the move runs at a constant rate.

Additional Pan & Zoom Glide By

Moves the visible area the whole way across the image in the chosen Direction, while the image scales from 121% down to 112%.

Parameters:

• _Direction: Left, Right, Up, Down. The direction the visible area moves across the image.
• _Strength: Subtle, Medium, Strong. Multiplies how far the image scales above 100% by 0.55, 1 or 1.7. The scales in the description are for Medium.
• _Duration: Whole Slide, Half. Whole Slide runs the move over the slide's full duration. Half finishes the move halfway through and holds the last frame.
• _Easing: Smooth, Snappy, Back, Bounce, Elastic. The acceleration curve of each step of the move. With no curve selected, the move runs at a constant rate.

Additional Pan & Zoom Float

Moves the visible area back and forth near the center of the image in five short moves along the axis set by Direction, while the image scales between 108% and 114%. The move ends at the center.

Parameters:

• _Direction: Left, Right, Up, Down. The axis the visible area moves along.
• _Strength: Subtle, Medium, Strong. Multiplies how far the image scales above 100% by 0.55, 1 or 1.7. The scales in the description are for Medium.
• _Duration: Whole Slide, Half. Whole Slide runs the move over the slide's full duration. Half finishes the move halfway through and holds the last frame.
• _Easing: Smooth, Snappy, Back, Bounce, Elastic. The acceleration curve of each step of the move. With no curve selected, the move runs at a constant rate.

Additional Pan & Zoom Corner Arc

Scales the image from 100% up to 121% while the visible area moves most of the way toward the chosen Corner, back toward the center, and then into the corner.

Parameters:

• _Corner: Top Left, Top Right, Bottom Left, Bottom Right. The corner the view moves toward.
• _Strength: Subtle, Medium, Strong. Multiplies how far the image scales above 100% by 0.55, 1 or 1.7. The scales in the description are for Medium.
• _Duration: Whole Slide, Half. Whole Slide runs the move over the slide's full duration. Half finishes the move halfway through and holds the last frame.
• _Easing: Smooth, Snappy, Back, Bounce, Elastic. The acceleration curve of each step of the move. With no curve selected, the move runs at a constant rate.

Additional Pan & Zoom Tilt Sweep

Moves the visible area from 25% to 75% of the way across the image in the chosen Direction, while the image rotates from -1.4 to 1.4 degrees. It scales from 110% to 119% at the middle of the move and back to about 114%.

Parameters:

• _Direction: Left, Right, Up, Down. The direction the visible area moves across the image.
• _Strength: Subtle, Medium, Strong. Multiplies how far the image scales above 100% by 0.55, 1 or 1.7. The scales in the description are for Medium.
• _Duration: Whole Slide, Half. Whole Slide runs the move over the slide's full duration. Half finishes the move halfway through and holds the last frame.
• _Easing: Smooth, Snappy, Back, Bounce, Elastic. The acceleration curve of each step of the move. With no curve selected, the move runs at a constant rate.

Additional Looks Category

The Looks category holds three presets that each add two or three visual effects to the layer, with fixed values chosen to work together.

Additional Looks Noir

Adds two effects to the layer: Film Grain with noise 45, scanlines 18, size 256 and mono 100, and Vignette with amount 65, size 45 and softness 55. The configuration panel lists the same values.

Parameters:

• _Lifetime: With Animation, A Moment, Stays. With Animation builds the effect up from none to full over Duration and keeps it on. A Moment raises the effect to full over the first half of Duration and clears it over the second half. Stays shows the effect at full from the start and keeps it on.
• _Strength: Subtle, Medium, Strong. Multiplies the Film Grain noise and the Vignette amount by 0.5, 1 or 1.6.
• _Duration: The effect's length, in milliseconds. By default it matches the length of the layer's animation in the scene the Timeline shows, or 600 for A Moment.

Additional Looks Vintage

Adds three effects to the layer: Film Grain with noise 55, scanlines 12, size 256 and mono 0, Duotone with shadow #2a1d12, highlight #f3e6c8 and mix 55, and Vignette with amount 60, size 48 and softness 50. The configuration panel lists the same values.

Parameters:

• _Lifetime: With Animation, A Moment, Stays. With Animation builds the effect up from none to full over Duration and keeps it on. A Moment raises the effect to full over the first half of Duration and clears it over the second half. Stays shows the effect at full from the start and keeps it on.
• _Strength: Subtle, Medium, Strong. Multiplies the Film Grain noise, the Duotone mix and the Vignette amount by 0.5, 1 or 1.6.
• _Duration: The effect's length, in milliseconds. By default it matches the length of the layer's animation in the scene the Timeline shows, or 600 for A Moment.

Additional Looks Dreamy

Adds two effects to the layer: Defocus with amount 30, and Vignette with amount 40, size 60 and softness 60. The configuration panel lists the same values.

Parameters:

• _Lifetime: With Animation, A Moment, Stays. With Animation starts the effect at full and clears it over Duration, then turns it off. A Moment raises the effect to full over the first half of Duration and clears it over the second half. Stays shows the effect at full from the start and keeps it on.
• _Strength: Subtle, Medium, Strong. Multiplies the Defocus amount and the Vignette amount by 0.5, 1 or 1.6.
• _Duration: The effect's length, in milliseconds. By default it matches the length of the layer's animation in the scene the Timeline shows, or 600 for A Moment.

Additional Stylize Category

The Stylize category holds nine presets that each add one visual effect to the layer.

Additional Stylize Vignette

Adds a Vignette effect to the layer, with amount 55, size 52 and softness 50. The configuration panel lists the same values.

Parameters:

• _Lifetime: With Animation, A Moment, Stays. With Animation builds the effect up from none to full over Duration and keeps it on. A Moment raises the effect to full over the first half of Duration and clears it over the second half. Stays shows the effect at full from the start and keeps it on.
• _Strength: Subtle, Medium, Strong. Multiplies the Vignette amount by 0.5, 1 or 1.6.
• _Duration: The effect's length, in milliseconds. By default it matches the length of the layer's animation in the scene the Timeline shows, or 600 for A Moment.

Additional Stylize Film

Adds a Film Grain effect to the layer, with noise 60, scanlines 35, size 256 and mono 0. The configuration panel lists the same values.

Parameters:

• _Lifetime: With Animation, A Moment, Stays. With Animation starts the effect at full, reduces it to 60% over Duration, then turns it off. A Moment raises the effect to full over the first half of Duration and clears it over the second half. Stays shows the effect at full from the start and keeps it on.
• _Strength: Subtle, Medium, Strong. Multiplies the Film Grain noise by 0.5, 1 or 1.6.
• _Duration: The effect's length, in milliseconds. By default it matches the length of the layer's animation in the scene the Timeline shows, or 600 for A Moment.

Additional Stylize Grain

Adds a Grain effect to the layer, with amount 45, speed 50 and color 0. The configuration panel lists the same values.

Parameters:

• _Lifetime: With Animation, A Moment, Stays. With Animation starts the effect at full, reduces it to 60% over Duration, then turns it off. A Moment raises the effect to full over the first half of Duration and clears it over the second half. Stays shows the effect at full from the start and keeps it on.
• _Strength: Subtle, Medium, Strong. Multiplies the Grain amount by 0.5, 1 or 1.6.
• _Duration: The effect's length, in milliseconds. By default it matches the length of the layer's animation in the scene the Timeline shows, or 600 for A Moment.

Additional Stylize Duotone

Adds a Duotone effect to the layer, with shadow #141833, highlight #ffe9d6 and mix 100. The configuration panel lists the same values.

Parameters:

• _Lifetime: With Animation, A Moment, Stays. With Animation builds the effect up from none to full over Duration and keeps it on. A Moment raises the effect to full over the first half of Duration and clears it over the second half. Stays shows the effect at full from the start and keeps it on.
• _Strength: Subtle, Medium, Strong. Multiplies the Duotone mix by 0.5, 1 or 1.6.
• _Duration: The effect's length, in milliseconds. By default it matches the length of the layer's animation in the scene the Timeline shows, or 600 for A Moment.

Additional Stylize Chromatic

Adds a Chromatic Aberration effect to the layer, with amount 35, mode radial, angle 0 and mix 100. The configuration panel lists the same values.

Parameters:

• _Lifetime: With Animation, A Moment, Stays. With Animation starts the effect at full and clears it over Duration, then turns it off. A Moment raises the effect to full over the first half of Duration and clears it over the second half. Stays shows the effect at full from the start and keeps it on.
• _Strength: Subtle, Medium, Strong. Multiplies the Chromatic Aberration amount by 0.5, 1 or 1.6.
• _Duration: The effect's length, in milliseconds. By default it matches the length of the layer's animation in the scene the Timeline shows, or 600 for A Moment.

Additional Stylize Halftone

Adds a Halftone effect to the layer, with size 8, style dots, softness 50, angle 0 and mix 100. The configuration panel lists the same values.

Parameters:

• _Lifetime: With Animation, A Moment, Stays. With Animation builds the effect up from none to full over Duration and keeps it on. A Moment raises the effect to full over the first half of Duration and clears it over the second half. Stays shows the effect at full from the start and keeps it on.
• _Strength: Subtle, Medium, Strong. Multiplies the Halftone mix by 0.5, 1 or 1.6.
• _Duration: The effect's length, in milliseconds. By default it matches the length of the layer's animation in the scene the Timeline shows, or 600 for A Moment.

Additional Stylize Posterize

Adds a Posterize effect to the layer, with levels 6 and mix 100. The configuration panel lists the same values.

Parameters:

• _Lifetime: With Animation, A Moment, Stays. With Animation builds the effect up from none to full over Duration and keeps it on. A Moment raises the effect to full over the first half of Duration and clears it over the second half. Stays shows the effect at full from the start and keeps it on.
• _Strength: Subtle, Medium, Strong. Multiplies the Posterize mix by 0.5, 1 or 1.6.
• _Duration: The effect's length, in milliseconds. By default it matches the length of the layer's animation in the scene the Timeline shows, or 600 for A Moment.

Additional Stylize Pixelate

Adds a Pixelate effect to the layer, with size 14 and mix 100. The configuration panel lists the same values.

Parameters:

• _Lifetime: With Animation, A Moment, Stays. With Animation starts the effect at full and clears it over Duration, then turns it off. A Moment raises the effect to full over the first half of Duration and clears it over the second half. Stays shows the effect at full from the start and keeps it on.
• _Strength: Subtle, Medium, Strong. Multiplies the Pixelate size by 0.5, 1 or 1.6.
• _Duration: The effect's length, in milliseconds. By default it matches the length of the layer's animation in the scene the Timeline shows, or 600 for A Moment.

Additional Stylize Glitch

Adds a Glitch effect to the layer, with intensity 45, frequency 6 and constant 0. The configuration panel lists the same values.

Parameters:

• _Lifetime: With Animation, A Moment, Stays. With Animation starts the effect at full, reduces it to 60% over Duration, then turns it off. A Moment raises the effect to full over the first half of Duration and clears it over the second half. Stays shows the effect at full from the start and keeps it on.
• _Strength: Subtle, Medium, Strong. Multiplies the Glitch intensity by 0.5, 1 or 1.6.
• _Duration: The effect's length, in milliseconds. By default it matches the length of the layer's animation in the scene the Timeline shows, or 600 for A Moment.